Horizontal Baler with automatic binding (5 times)

The AVOS 1410 A5 is especially designed for the requirements of the waste management companies, to use one baler for pressing all materials, even the difficult ones. AVERMANN horizontal balers offer our clients a maximum of efficiency and user-friendliness. The binding 5 times vertically ensures solid bales, even with difficult materials. The machines can be delivered from 37 up to 90 kW engines; the press force is between 70 and 100 tons. The throughput can be up to 20 tons per hour; bale dimensions are 1100 x 750 x adjustable length (up to 700 kg).
Specifications

• The frame of the machine consists of a solid welded construction and is provided for the fastening on the floor with dowels.

• Capacity controlled, power saving pressure ram drive, alternatively via 1 or 2 axial piston pumps.

• Rapid motion/power speed control system as well as an automatic speed adaptation, depending on the necessary pressing power.

• Cutting knives on the force plate and on the counter plate for cutting off the overhanging material in the hopper section.

• Adjustable knife clearance to minimize the cutting forces.

• Cutting edge stamper, fully automatic hydraulically operated; power: 196 kN.

• Force plate channel laterally and made of 15 mm XAR® 400 sheet steel.

• Screw press bottom made of wear-resistant 15 mm XAR® 400 sheet steel.

• Press ram cover for continuous feeding.

• Three-sided adjustment of press channel, regulation depending on pressing power.

• Automatic binding with mechanical wire pulling- and cabling device.

• Bottom closing unit, hydraulically controlled, to close the lance holes in the bottom during the pressing procedure.

• Electrically controlled length-measuring system.

• Pressure ram guiding with low-maintenance plastic guides, highly wear-resisting and indifferent to dust.

• Free programmable PLC, Siemens Simatic S 7.

• 4 station selection switches for different material types.

• Working hour meter.

• Photo cells inside the hopper of the baler for the press stroke control and as overcharge protection.

• Wire coil holder for automatic binding to keep 8 pieces of 100 kg wire coils (screwable).

• Infinitely variable speed adjustment from the feed belt up to a drive capacity of 4 kW.

• First equipment of hydraulic oil, capacity: either 1,000 l or 2,000 l, depending on motor rating.

• Separate heating-, cooling- and filter circuit for the hydraulic oil, Oil filtration with 3µm filter.

• Heating capacity: approx. 5,500 W or 7,500 W, depending on motor rating.

• Cooling capacity: approx. 28 kW with 100 l/min.

Special equipment for AVOS 1410 A5:

• Special press ram

            For pressing scrap, residual waste, wooden boxes etc. There are no openings inside the ram where pressed material can get jammed or emerge. The slots are only released for binding the bale. The press-ram is patented (patent No. DE19860316A1).

 

 

 

 

 

 

 

 

 

 

 

 

• Wire coil holder 400 kg

• Material re-holders

• Touchscreen display

• Ruffler

• Feeding conveyor belt

• Perforator/shredder

• Bale slide

• Bin-lift tipping devic

• Maintenance platform

• Feeding hopper

• Wire-end control

• Personal protection system

Power pack can be supplied with 2 separate electro-hydraulic drives!

Advantage:

• short cycle times when using both hydraulic pumps

• energy-saving operation possible with one hydraulic pump

Technical data